Wirepath WPS-300-DVR - Display

110
WPS-300-DVR-9CH & 16CH Installation and Users Manual
9.3.17. DISPLAY
The Display settings adjust the video output options as viewed through the VGA and HDMI connections.
 •VGA/HDMIRESOLUTION
Select the desired screen resolution from the drop-down. It is recommended to match the native resolution
of the video display being used. Please refer to the video display documentation for specic information.
OPTIONS: 1024 x 768, 1280 x 1040, 1920 x 1080.
 •BRIGHTNESS
Select the desired brightness setting from the drop-down. This setting will determine the black level in the
video output. OPTIONS: 0-100
 •CONTRAST
Select the desired contrast setting from the drop-down. This setting will determine the white level in the
video output. OPTIONS: 0-100
 •HUE
Select the desired hue setting from the drop-down. This setting will determine the red, green and blue color
level in the video output. OPTIONS: 0-100
 •SATURATION
Select the desired saturation setting from the drop-down. This setting will determine the overall color
intensity in the video output. OPTIONS: 0-100
 •SHARPNESS
Select the desired sharpness setting from the drop-down. This setting will dene the edge detail in the video
output. OPTIONS: On, Off