Wirepath WPS-365-DVR - Camera

95
WPS-365-DVR-9CH & 16CH Installation and Users Manual
9.3.5. CAMERA
The Camera setup allows the administrator to dene additional attributes for each camera
Thefollowingisabriefdescriptionforeachiteminthismenuanditsspecicoperations:
 •TITLE
Name each camera with a unique identifying name up to eight characters maximum.
 •MOTIONDETECTION
Enable or disable motion detection for the selected camera. Default setting enables this feature.
  Note:ThishasnoeffectonSmartSearchfunctions.
 •COVERT
If a camera’s covert function is enabled, the video of this camera can only be seen if the user has logged
in as an Administrator. The default setting is disabled.
 •CALLBYEVENT
If the following events occur for this camera, the main display (VGA or BNC) will switch to the video of this
camera for a specied period of time (dwell). Options are: Off, Motion, Alarm, Both (Motion & Alarm).
 •DWELLTIME
Used in conjunction with Call By Event, Dwell Time species how long the main display will show the
camera on the screen. The Dwell Time can be set from 3 to 60 seconds
 •AUDIO
Select the corresponding AUDIO IN input for the camera. The audio for the selected AUDIO IN input will
be recorded along with the video for this camera. Selections include N/A or AUDIO Inputs 1 or 2. The
AUDIO INPUTS can only be assigned to one camera each. The default setting is “N/A”.
Note:Theaudiowillonlybeheardwheninfullwindowviewofthecorrespondingcameraandthe
  AudioOutbuttonisenabled.
 •RECORDQUALITY
Select the Record Quality for each camera. Values range from 1-9, with 1 the lowest quality and 9 the
highest quality.