Wirepath WPS-365-DVR - Privacy Mask

99
WPS-365-DVR-9CH & 16CH Installation and Users Manual
9.3.7.2. PRIVACY MASK
Privacy Mask allows administrator level users to dene areas of the camera to not be shown in the camera
image. There areas will be hidden with black boxes/grids
1. Select the Motion Detection / Privacy Mask tab.
2. Select the desired camera from the Camera drop-down list.
3. Select Privacy Mask from the Type drop-down list.
4. When opened, the area will show the camera image. Click and Hold the left mouse button and drag over
the area where privacy is desired. (Yellow indicates the selected Privacy area)
5. Select Upload to save the settings.
6. Repeat for all cameras connected to the DVR.