Wirepath WPS-365-DVR - Page 90

90
WPS-365-DVR-9CH & 16CH Installation and Users Manual
•LocalGuestLevel
Allows or restricts access to the DVR by Guests accessing the DVR through Local interfaces (DVR GUI via front
panel buttons, IR remote control or home automation Ethernet control) without a dedicated Login. The option
selected determines the level of access a Guest will have.
“-“ (Default) - No Guest Access Allowed (Does not prevent access by User with login credentials -
recommended.)
Operator - Provides access to view and control all cameras. No access to Search or settings is provided.
Supervisor- Provides access to view and control all cameras, Search, Archive and modify basic settings.
Administrator - Provides full access to the DVR allowing for viewing of all cameras and modication to all
settings. Use this setting with caution.
UserName - Provides access to the features as dened in the Advanced Settings for a particular user.
Note: If an RS-232 or IP control system is being used, the Default setting does not allow the system to
control the DVR, and prevents Guest access to DVR features. This setting must be enabled to a minimum
of Operator to allow control from third party automation systems.
• Remote Guest Level
Allows or restricts access to the DVR by Guests accessing the DVR from the Internet Explorer plugin interface
without a dedicated Login. The option selected determines the level of access a Remote Guest will have.
“-“ (Default) - No Guest Access Allowed (Does not prevent access by User with login credentials -
recommended.)
Operator - Provides access to view and control all cameras. No access to Search or settings is provided.
Supervisor- Provides access to view and control all cameras, Search, Archive and modify basic settings.
Administrator-ProvidesfullaccesstotheDVRallowingforviewingofallcamerasandmodicationtoall
settings. Use this setting with caution.
UserName - Provides access to the features as dened in the Advanced Settings for a particular user. See
Adv: below for more information. Note: It is recommended that Remote Guest Level be set to the default
“-“ to prevent unwarranted access to the DVR from outside sources.
•AUTOLOGOUT
If there is no user operation in the time selected from 1 minute to 24 hours, the user will automatically
be logged out.
 •LOGINNAME
Enter a unique name for each user.
 •PASSWORDANDCONFIRMPASSWORD
Enter a unique password (numbers only) for each user.
• LEVEL
Select the appropriate access level (Administrator, Supervisor, Operator, or Customized) for each user.
 •DEFAULTLOGIN
Check the Default Login box so the corresponding user’s login name and password will be the default
credentials populated in the Login/Logout dialog box so the user doesn’t have to enter text to login
the system. Default Login will be noted with a “V” in the Default Login column.