Wood-mizer LX50 G14S - General Maintenance; Every 8 Hours of Sawmill Operation

Maintenance
General Maintenance
4
4-2 doc032021 Maintenance
See Figure 4-2.
4.2 General Maintenance
Every 8 Hours of Sawmill Operation
 Check the engine oil level. (See the Engine Manual.)
 Clean the track rollers, mast carriages and track wipers.
 After you have finished using the sawmill, lower the saw head all the way down so that the saw
head rests on the stop bolts and the lift cables remain tensioned.
 Inspect the sawmill parts for damage.
 Open the blade housing cover and brush any sawdust buildup from the housing, cover and V-belts.
FIG. 4-2
Mast Track Surface