Wood-mizer LX50 G14S - Belt Sizes; Blade Sizes; Cutting Capacity

Safety Instructions
Belt Sizes
Safety Instructions doc032021 1-14
1
1.9 Belt Sizes
See Table 1-2. Belt sizes for the LX50 sawmill are shown below.
1.10 Blade Sizes
See Table 1-3. Wood-Mizer offers three types of blades for all models of sawmills to provide efficient
sawing. The engine/motor size of your sawmill and type of wood you saw should determine which
blade you choose for optimum performance.
See the Blade Handbook for blade hook angle, tooth height and tooth set specifications.
1.11 Cutting Capacity
See Table 1-4. The log size capacities of the LX50 sawmill are listed below.
Description Belt Size
Drive-Side Blade Wheel Belt
B69 CARLISLE
SUPER II
Idle-Side Blade Wheel Belt
B47.5
1
1
To insure proper blade tracking, use Goodyear,
Dayco Super II, or Browning belts only.
TABLE 1-2
Engine/Motor Size Recommended Blade for Sawing:
Thickness Length
EH7S/G14
0.035" (0.90mm)
0.039" (1 mm)
0.042" (1.07 mm)
0.045" (1.14mm)
3340-3360 mm
(131,5"-132")
TABLE 1-3
Maximum
Diameter
Maximum
Length
LX50 66 cm 3.8 m
TABLE 1-4