Wood-mizer LX50 G14S - Log Clamp and Side Support Installation

SAWMILL ASSEMBLY
Log Clamp and Side Support Installation
SAWMILL ASSEMBLY 15doc032021 2-11
2
2.4 Log Clamp and Side Support Installation
1. To mount the log clamp, first dismount the mounting bracket on one side of the log clamp rod,
insert the log clamp arm onto the rod and side support and reinstall the mounting bracket with
M10x20 bolts. Attach the complete log clamp in the middle of the bed using the M10x30 bolts.
See figure 2-7.
FIG. 2-7
Mounting Bracket
Rod
Bed Section
Log Clamp Arm
Side Support