EasyManua.ls Logo

Wood-mizer LX50 G14S - Starting the Engine;Motor

Wood-mizer LX50 G14S
113 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Sawmill Operation
Starting the Engine/Motor
3
3-21 doc072221 Sawmill Operation
See Figure 3-18.
3.18 Starting the Engine/Motor
See the engine/motor manual supplied with your machine for starting and operating instructions.
IMPORTANT! When starting the machine for the first time, check that
main motor rotation direction is as indicated by the arrow located on
the motor body. If the rotation direction is incorrect, invert the phases in
the phase inverter in the power socket. Setting the phases in the
phase inverter correctly will ensure correct rotation directions of all
sawmill motors (it concers sawmills with electric motors).
DANGER! Make sure all guards and covers are in place and
secured/closed before operating the sawmill. Failure to do so may
result in serious injury.
DANGER! Always be sure the blade is disengaged and all persons are
out of the path of the blade before starting the engine or motor. Failure
to do so may result in serious injury.
WARNING! Always wear eye, ear, respiration and foot protection as
well as safety clothing when operating the sawmill. Failure to do so
may result in serious injury.
FIG. 3-18
Tensioner Cable
Throttle Cable
!

Table of Contents

Other manuals for Wood-mizer LX50 G14S

Related product manuals