Wood-mizer LX50 G14S - Keep Safety Labels in Good Condition

Safety Instructions
Keep Safety Labels in Good Condition
Safety Instructions doc032021 1-10
1
NOTE! Before installation of the blade, inspect it for damage and
cracks. Use only properly sharpened blades. Always handle the blade
with extreme caution. Use suitable carrier equipment for transporting
the blades.
Keep Safety Labels in Good Condition
IMPORTANT! Always be sure that all safety decals placed on the
machine are clean and readable. Replace all damaged safety decals
to prevent personal injury or damage to the equipment. Contact your
local distributor, or call Wood-Mizer Customer Service to order more
decals.
IMPORTANT! When replacing any component having a safety decal
affixed, be sure to place an identical safety decal on the new
component.
See Table 1-1. See the table below for descriptions of the pictographic warning and informational
decals placed on the LX50 sawmill.
TABLE 1-1
Decal View Decal No. Description
096317 CAUTION! Read thoroughly the operator’s
manual before operating the sawmill.
Observe all safety instructions and rules
when operating the machine.
099220 CAUTION! Close all guards and covers
before starting the machine.
!
099220