Wood-mizer LX50 G14S - Clutch Lever Installation (Gas Sawmills)

SAWMILL ASSEMBLY
Clutch Lever Installation (Gas Sawmills)
2
2-32 15doc032021 SAWMILL ASSEMBLY
2.12 Clutch Lever Installation (Gas Sawmills)
1. Install the emergency stop button on the control box.
See figure 2-17.
2. Bolt the clutch cable to the lever. The customer has to secure the clutch cable in its middle position
for later adjustment.
See figure 2-18.
FIG. 2-17
FIG. 2-18
A