RM200QC User Manual
23
Volume
The volume option is used to set the system volume and the voice tag volume.
1. Select System volume or Voice tag volume by pressing the up and down sides of the
Navigation control.
2. Press the Enter (Select) button to open the volume level screen.
3. Press the up or down sides of the Navigation control to set the desired volume level.
4. Press the Enter (Select) button to save the volume level and return to the Volume window.
or
5. Set the other volume level or press the right side of the Navigation control (Exit) to go to
the Color QC screen.
Product Info
This screen displays important instrument information.
1. Press the bottom side of the Navigation control to view additional information.
2. Press the left side of the Navigation control (Back) to exit to go to the Settings window.
To Next Page
Loading...
Need help?
General
