RM200QC User Manual
18
Operation
Settings Menu
The Setting menu is used to set instrument options, initiate a calibration and view production
information from this menu. You should review and set the options as needed before using
your instrument for the first time.
1. Select the Settings icon in the function bar by pressing the left side of the Navigation
control.
2. Select the setting option from the list by pressing the up and down sides of the Navigation
control.
3. Press the Enter button to select the option.
Refer below for an explanation of each option.
Language
The language option allows you to select the languages that the instrument operates in. This
screen also appears when the instrument is turned on for the first time.
1. Select the language option from the list by pressing the up and down sides of the
Navigation control.
2. Press the Enter (Select) button to select the language and return to the Settings window.
USB Report Mode
The USB report mode option is used to set the device USB mode for output of reports to
computer. When the device is in this mode, it will work with your computer with similar
function to a USB memory stick.
To Next Page
Loading...
Need help?
General
