X-Rite RM200QC - Quick Check Menu; Quick Comparison Measurement Functions; Performing Color Compare; Measuring Opacity Check

RM200QC User Manual
35
Quick Check Menu
The Quick Check menu contains functions which allow you to make quick comparison
measurements that are not stored to the instrument. The following functions can be selected
from the menu.
- Color Compare is a quick function to measure a standard and then a sample and display
results.
- Opacity Check displays the percent opacity of a drawn down sample on an opacity card.
1. Select the Quick Check icon in the function bar by pressing on the right side of the
Navigation control.
2. Use the up and down sides of the Navigation control to select Color Compare or Opacity
Check, and then press the Enter button. Refer to the following pages for procedures.
Color Compare
1. Position the instrument on the standard to use as previously explained and take a
measurement.
A simulated color patch of the standard appears.