X-Rite RM200QC - USB Report Mode Exit; Calibrate Option; Aperture Setting

RM200QC User Manual
20
• DATA.CSV – This provides data for the measured standards and samples that is easily
manipulated in Excel to a format of your preference, or for more advanced data collection
and analysis.
5. Unplug the USB cable from the device to exit from the USB Report Mode.
Calibrate
The calibration option allows you to manually initiate a calibration. Refer to the Calibration
section earlier in this manual for information on performing a calibration.
Aperture
The aperture option is used to set the aperture size that the instrument defaults to when a
measurement is started. You can select Large (8 mm) or Small (4 mm).