Release 3.0 193
Appendix B. SCPI Command Reference
Overview
This appendix provides a summary of the Standard Commands for Programmable
Instruments (SCPI) that are supported by the this Programmable Power Supply.
Codes and Standards
This power supply conforms to the following international standards:
• IEEE Std 488.2-1992 “IEEE Standard Codes, Formats, Protocols, and Common
Commands For Use With IEEE Std 488.1-1987”
• IEEE Std 488.1-1987 “IEEE Standard Digital Interface for Programmable
Instrumentation”
• TIA/EIA-232F
• Standard Commands for Programmable Instruments (SCPI) Version 1997.0
IEEE 488.2
Requirements
GPIB control implements all IEEE 488.2 requirements.
SCPI
Requirements
The power supply conforms to the following SCPI requirements:
• SCPI mandated commands
• Questionable Status Register (QSR), Condition, Event, Enable
• Operation Status Register (OSR), Condition, Event, Enable
• Status Byte Register (SBR)
• Standard Event Status Register (SESR)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
