Xenosys LooksCAM2 - Page 32

CAMERA SYSTEM (LooksCAM2) 32 www.xenosys.co.kr
and turn on the power
Heat comes out during the
usage
Lot of current is needed to run
this product, so heat comes
out after long time of usage.
This symptom does not affect
the lifespan or quality.
Normal
Light intensity is weak after
the change of battery pack
Check the intensity step is
properly adjusted.
Change the intensity step
properly
Battery discharging time is
fast
Check if battery has been fully
charged.
(Check the battery status LED)
Battery pack is expendables,
so the lifespan will be shorter
than the first-time purchase
after certain period of time.
If the discharging time is fast
even fully charged status, it
means the battery lifespan has
been dead. We recommend
exchanging new battery pack.
LED light flickers sometimes
or intermittently
Check the contact looseness
of connection part of phone
jack
Contact local distributor or
manufacturer
Wifi connection is bad
Download WiFi Analyzer
application or other proper
surveillance program to find
out less traffic channel to
change LooksCAM wifi.
Not occupied channel or less
traffic channel to change
LooksCAM wifi. (Refer to page
22)
DC power supply is always
green color on indicator
It is normal to show green light
on DC power supply as it
shows the power ON.