Xerox 3225

Ch ang ing the
LLCI T Pap er Size
5-15
Advanced Printer Use
b Remove the
three black
screws from
the silver top
section of the
side rail.
c Lift the end of
the size
indicator bar at
top rear.
d Remove the
silver section
of the side rail.
e Disconnect the keyring-type fastener at the bottom of the
chain guide.
f Tilt and
remove the
side rail.
» No te: Store the
2 r ail section s,
2 thumb
screws, an d 3
black sc rews in
the printer s
storage ca binet
in case you
change the
paper siz e again
later.
g Reattach the chain guide.
h Skip to “Reassemble the LLCIT” on page 5-17.