Xerox 3225 User Manual

Chan ging the
LLCIT P aper Size
QMS 3825/3225/2025 Users Guide5-16
■ Left Side Rail - C Instructions
To change from A3 or A4 paper to any US size or B4, you must
install the left side rail in the tray. You should find two sections of
the side rail, one black and one silver, three black screws, and
two thumb screws stored in the printer’s storage cabinet.
a Disconnect the keyring-type fastener at the bottom of the
chain guide.
b Tilt the side rail into the left side of the tray.
c Lift the left end of the size indicator bar at top rear out of
the way, and set the silver top section of the side rail in
place, fastening it with its three black screws.
You may need to push the side rail above its normal position
to attach the front screw while avoiding the nearby punched
metal tab. Once attached, the rail rests under the tab.
d Align the side rail for the proper paper size and insert the
two thumb screws.
e Lower the size indicator bar into place.
f Reattach the chain guide.
g Proceed to “Reassemble the LLCIT” on the next page.

Xerox 3225 Specifications

General

Print Technology	Laser
Connectivity	USB 2.0, Ethernet, Wi-Fi
Monthly Duty Cycle	Up to 30, 000 pages
Input Paper Capacity	250 sheets
Output Paper Capacity	120 sheets
Functions	Print, Copy, Scan, Fax
First Page Out Time, Printing	As fast as 8.5 seconds
Processor	600 MHz
Print Memory (standard)	128 MB
Mobile Printing	Apple AirPrint, Google Cloud Print, Xerox Print Service Plug-in for Android
Scan Resolution	Up to 600 x 600 dpi
Fax Speed	33.6 kbps
Supported Operating Systems	Windows, Mac OS, Linux
Media Sizes	A4, A5, Letter, Legal, Executive, Envelope