Problem Solving
Xerox 700 Digital Color Press User Guide8-34
Cause: When the machine is configured to only print attached
documents when received by mail, a message with no attachments is
discarded upon receipt.
Remedy: To print the mail body or header information as well, change
settings in the Properties screen of CentreWare Internet Services.
Cause/RemedyCode
Cause: Invalid received mail output destination.
Remedy: Specify a correct output destination, and send the mail
again.
Cause: An error occurred with the offset stacking module.
Remedy: Power-cycle the machine. If the machine is not improved by
performing the relevant remedy, contact your Xerox Customer Support
Center.
Cause: Attempted to command a job flow to a print document. Print
documents are not supported by job flows.
Remedy: Check the document before starting the job flow.
Cause: When following the job flow, an error occurred.
Remedy: Check the settings for the job flow.
Cause: The print data cannot be processed because of PDL error.
Remedy: Check the print data and try to print again.
Cause: A disk full error occurred.
Remedy: Remove unnecessary data from the hard disk to increase
free disk space.
To Next Page
Loading...
