8825/8830 DDS User Guide/39
Special features and making special copies
(continued)
Saving and recalling job data
−
Store/ Recall key
The parameters, image, and features associated with the last copy job run
are stored in memory and may be recalled and used again.
Note: in the “...SCAN” mode, this feature is not available.
Press the Store/ Recall key to recall and reuse the information from the last
copy job.
The operator may also recall the last job information, scan a new image, and
print that image using all of the recalled settings.
When the Store/ Recall key is pressed, the STORE/ RECALL screen is
displayed.
Recalling the last job
Press the Enter key to select LAST JOB.
The LAST JOB screen is displayed.
The screen then displays:
Press the Enter key to return to the “READY...” screen.
The operator may then use the settings as they have been recalled, or may
change one or more of them.
Store/
To Next Page
Loading...
Need help?
General
