Xerox 8830 - File System Management (SCAN Mode) (continued); Deleting All Images from Hard Disk

8825/8830 DDS User Guide/45
Special features and making special copies
Saving and Recalling job data − Store/ Recall key
Recalling Factory Defaults
The factory defaults are permanently stored, and may be recalled as the
active defaults.
Press the Store/ Recall key.
Press the Next key until RECALL FACTORY DEFAULTS is highlighted.
Then, press the Enter key to confirm the choice.
Press the Enter key. The factory defaults are immediately recalled.
JOB PARAMETERS RECALLED
PRESS ENTER TO CONTINUE
STORE/ RECALL
JOB TEMPLATES
SAVE DEFAULT TEMPLATE
RECALL FACTORY DEFAULTS