Xerox 8830 - Scanning to the Network (SCAN Mode) (continued); Clearing Scanned Images from Hard Disk

8825/8830 DDS User Guide/42
Special features and making special copies
Saving and recalling job data − Store/ Recall key
(continued)
Recalling Job Templates
Job parameters that were previously stored as templates may be recalled
and used for the current job.
Press the Store/ Recall key.
Press the Next key until JOB TEMPLATES is highlighted. Then, press the
Enter key to confirm the choice.
The JOB TEMPLATES screen is displayed.
Press the Next key to highlight RECALL TEMPLATE, and press the Enter
key.
The RECALL TEMPLATE screen is displayed. The storage locations that
actually contain templates are shown.
Use the numeric keypad to enter the number of the template to be recalled.
Press the Enter key to confirm the choice.
The associated template is recalled; the DDS User Interface settings are
configured accordingly; and the screen confirms that the template was
recalled. The current job will now be processed using the parameters
recalled from the template.
JOB PARAMETERS RECALLED
PRESS ENTER TO CONTINUE
RECALL TEMPLATE
TEMPLATES IN USE:123456789
ENTER TEMPLATE NUMBER 3
STORE/ RECALL
LAST JOB
JOB TEMPLATES
SAVE DEFAULT TEMPLATE
JOB TEMPLATES
RECALL TEMPLATE
SAVE TEMPLATE
DELETE TEMPLATE