Xerox Copycentre C118 System Administration Guide

-C Option
Xerox CopyCentre/WorkCentre 118 System Administration Guide 57
NOTE: If several parameters are specified in an lpr command, data may not print
correctly.
NOTE: The system default is used if no parameter is specified.
NOTE: If the print data specifies double-sided or single-sided printing, those
specifications take priority over any -C option.
Specifying collation
The following parameter can be specified.
NOTE: For some print languages, the collation parameter may be invalid.
Specifying color and print modes
The following color and print mode parameters can be specified.
NOTE: The color setting is not available on the machine.
NOTE: If several parameters are specified in the first lpr command, data may not print.
A5D/a5d Double-sided printing on A5 (148 × 210 mm/5.8 ×
8.3 inches) paper and long-edge binding
A5T/a5t Double-sided printing on A5 (148 × 210 mm/5.8 ×
8.3 inches) paper and short-edge binding
B5D/b5d Double-sided printing on B5 (182 × 257 mm/7.2 ×
10.1inches) paper and long-edge binding
B5T/b5t Double-sided printing on B5 (182 × 257 mm/7.2 ×
10.1 inches) paper and short-edge binding
Parameter Description
COLLATE/collate Sorts prints electronically.
Parameter Description
CC/cc Selects color for color mode and quality priority for print mode.
CB/cb Selects color for color mode and speed priority for print mode.
GC/gc Selects monochrome for color mode and quality priority for print mode.
GB/gb Selects monochrome for color mode and speed priority for print mode.
AC/ac Selects auto (color/monochrome) for color mode and quality priority for
print mode.
AB/ab Selects auto (color/monochrome) for color mode and speed priority for
print mode.
Parameter Description

Xerox Copycentre C118 Specifications

General

Brand	Xerox
Model	Copycentre C118
Category	Copier
Language	English