Xerox Copycentre C118 System Administration Guide

4 UNIX TCP/IP
56 Xerox CopyCentre/WorkCentre 118 System Administration Guide
Specifying double-sided printing
The following parameters can be specified.
NOTE: If several parameters are specified in an lpr command, data may not print
correctly.
NOTE: The system default is used if no parameter is specified.
NOTE: If the print data specifies double-sided or single-sided printing, those
specifications take priority over any -C option.
Specifying paper size and double-sided printing
Select a paper size and a binding option. The following parameters can be specified:
PLB/plb Selects labels.
PQU/pqu Selects bond paper.
PRC/prc Selects recycled paper.
Parameter Description
DUP/dup Double-sided printing as follows:
TUMBLE/tumble Double-sided printing as follows:
SIMP/simp Single-sided printing
Parameter Description
A3D/a3d Double-sided printing on A3 (297 × 420 mm/11.7 ×
16.5 inches) paper and long-edge binding
A3T/a3t Double-sided printing on A3 (297 × 420 mm/11.7 ×
16.5 inches) paper and short-edge binding
A4D/a4d Double-sided printing on A4 (210 × 297 mm/8.3 ×
11.7 inches) paper and long-edge binding
A4T/a4t Double-sided printing on A4 (210 × 297 mm/8.3 ×
11.7 inches) paper and short-edge binding
B4D/b4d Double-sided printing on B4 (257 × 364 mm/10.1 ×
14.3 inches) paper and long-edge binding
B4T/b4t Double-sided printing on B4 (257 × 364 mm/10.1 ×
14.3 inches) paper and short-edge binding
Parameter Description
A B
C D
A B
C D

Xerox Copycentre C118 Specifications

General

Brand	Xerox
Model	Copycentre C118
Category	Copier
Language	English