Xerox EC8056 - Page 269

PPRROOBBAABBLLEE CCAAUUSSEESS SSOOLLUUTTIIOONNSS
The documents loaded in the document feeder exceed
the maximum capacity allowed.
Place fewer documents in the document feeder.
Improperly adjusted document feeder guides. Adjust the paper guides to fit snugly against the paper
loaded in the document feeder.
Paper Misfeeds and Paper Size Jams
PPRROOBBAABBLLEE CCAAUUSSEESS SSOOLLUUTTIIOONNSS
The paper is not correctly positioned in the tray.
• Remove the misfed paper and reposition it properly
in the tray.
• Adjust the paper guides in the tray to match the
size of the paper.
The paper tray is too full. Remove some of the paper. Do not load paper past the
fill line.
The paper guides are not correctly adjusted to the
paper size.
1 Remove the paper.
2 Adjust the paper guides in the tray to match the
size of the paper.
3 Replace the paper.
The tray contains warped or wrinkled paper. Remove the paper, smooth it out, and reload it. If it still
misfeeds, do not use that paper.
The paper is moist from humidity. Remove the moist paper and replace it with new, dry
paper.
Using paper of the wrong size, thickness, or type. Use only Xerox approved paper. For details, refer to
Supported Paper.
Label and Envelope Misfeeds
PPRROOBBAABBLLEE CCAAUUSSEESS SSOOLLUUTTIIOONNSS
The label sheet is facing the wrong way in the tray. Load label sheets according to the instructions from
the manufacturer.
• Load labels face up in trays 1–4.
• Load labels face down in tray 5.
Envelopes are loaded in the wrong tray. Use tray 5 to print envelopes.
Xerox
®
EC8036/EC8056 Color Multifunction Printer User Guide 269
Troubleshooting