Xerox
®
N60w Scanner Welcome
2-2 User Guide
– 32-bit or 64-bit Windows 10
• Minimum of 2 gigabyte (GB) of internal memory (RAM)
• Minimum available hard disk space:
– 350 MB for the scanner driver
– 1 GB for Visioneer OneTouch
– 1 to 3 GB for each additional application
A VGA or SVGA Monitor:
• The recommended settings for your monitor are:
– Color quality of 16-bit or 32-bit
– Resolution set to at least 800 x 600 pixels
Refer to your Windows documentation for instructions on setting the color quality and resolution
for the monitor.
Documentation
The following printed documentation is provided in the box:
• Installation guide—abbreviated scanner setup and installation instructions.
• Technical Support and Warranty Information—contact information for technical support
and customer service, and a brief overview of our standard product warranty.
• Register Your Scanner and Review Card—follow the instructions on the card to register
your scanner. Please take a moment to write a short review of your experience with this
scanner.
The following soft-copy documentation is available during installation or on
www.xeroxscanners.com
:
• Scanner user guide—instructions for scanner setup, installation, operation, maintenance,
safety, and warranty.
• OneTouch scanning guide—instructions for configuring and scanning using OneTouch.
• TWAIN scanning guide—instructions for accessing and scanning using the TWAIN
interface.
• Patch code sheets—use with an application that supports detection of patch code data
when using the TWAIN interface. The patch code page layouts have been specifically
designed for your scanner. The file contains Patch 2, 3 and T layouts for A4 and U.S. Letter size
pages.