Xerox N60w - Editing a File Profile; Deleting a File Profile; Address Book

Xerox
®
N60w Scanner Device Settings
13-4 User Guide
To create a new file profile:
1. Tap New.
2. Setup your scan profile information and define your scan settings. See Scan Settings for
detailed information. Tap Save when complete.
Editing A File Profile
To modify a current file profile:
1. On the email of the LCD Touch Panel, tap Settings > File Profiles.
2. Select the file profile which you want to modify from the list then tap Edit.
3. Modify the information.
4. Tap Save to retain the settings or Cancel to leave the page without saving the settings.
Deleting A File Profile
To delete a current file profile:
1. On the LCD Touch Panel, tap Settings > File Profiles.
2. Select the file profile which you want to delete from the list then tap Delete.
3. A prompt will appear. Click OK to confirm removing the file profile or Cancel to exit.
Address Book
Create or edit your address book. See Setting up the Address Book for detailed information.
Item Description
Profile Name Enter your profile name.
Scan to Choose your [Scan to] destination protocol.
Select: FTPES://, FTP: // (default), FTPS: //, SMB: \\, USB, Public Folder, SharePoint
USB: Store the scanned image to an inserted USB flash drive.
Public Folder: Store the scanned image to the memory of the product and then
access the image via the product’s The Scanner’s Web Interface.
Target URL Enter the IP address of your Scan to destination.
Port # Enter the port number for the Scan to server.
Passive Mode
Set your FTP connection mode.
Select: On/Off (default)
Login Name Enter your login name to use the designated folder.
Password Enter your password to use the designated folder.
File Name Enter a default file name.