User Guide 1-1
1. Safety
Safety Introduction
Notices and Safety
Please read the following instructions carefully before operating the machine and refer to them as
needed to ensure the continued safe operation of your machine.
Your Xerox
®
Product and supplies have been designed and tested to meet strict safety
requirements. These include safety agency evaluation and certification, and compliance with
electromagnetic regulations and established environmental standards.
WARNING:
The safety and environment testing and performance of this product have been verified using
Xerox
®
Materials only. Unauthorized alterations, which may include the addition of new
functions or connection of external devices, may impact the product certification. Please
contact your Xerox Representative for more information.
Operational Safety Information
Your Xerox
®
Equipment and supplies have been designed and tested to meet strict safety
requirements. These include safety agency examination, approval, and compliance with
established environmental standards.
To ensure the continued safe operation of your Xerox
®
Equipment, follow these safety guidelines
at all times:
Do these:
• Always follow all warnings and instructions that are marked on or supplied with the
equipment.
• Always use materials specifically designated for this product, the use of other materials may
result in poor performance and create a hazardous situation. Do not use aerosol cleaners,
they may be explosive and flammable under certain conditions.
• Always exercise care when moving or relocating equipment.
• Always locate the machine on a solid support surface that has adequate strength to support
the weight of the machine.
• Always locate the machine in an area that has adequate ventilation and room for servicing.
• Always unplug this equipment from the electrical outlet before cleaning.
Note: Yo ur Xerox
®
Machine is equipped with an energy saving device to conserve power when the
machine is not in use. The machine may be left on continuously.
Do not do these:
• Never use a ground adapter plug to connect the equipment to a power outlet that lacks a
ground connection terminal.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
