User Guide 12-1
12. Hotspot
Setting Up the Scanner as a Hotspot
In Hotspot mode, your mobile devices and the scanner are connected wirelessly without an
additional AP (Access Point) since the scanner itself works as an AP.
1. On the Home Screen of the LCD Touch Panel, tap Hotspot. The SSID and IP Address will be
displayed.
2. On your mobile devices, make sure XeroxN60w–XXXXXX (XXXXXX indicates the last six digits
of the MAC Address) has been selected as your network name (SSID).
Note: You can customize the Network SSID name and add security settings. To do so, go to
Settings > Network > Hotspot Settings.
To Next Page
Loading...
