Xerox N60w - Page 48

Xerox
®
N60w Scanner Device Settings
13-6 User Guide
Reset to
Default
Resets settings to default.
Reset Admin: Reset the login user name and password of the product’s web page.
Reset Network Settings: Resets the network settings to factory default.
Reset Admin and Network: Reset both the login information and the network
settings to default.
Reset to Factory Default: Resets all the configurations to factory default settings.
WARNING: This cannot be undone.
Run-in Test For internal use only.
Save Log The log can be helpful for the technician to identify your problem. You can either Save
Log to USB Flash or Save Image to USB Flash (if an image is corrupted, for
example).
LCM Test Tests LCD performance.
1. Touch the LCM Test button to begin the test.
2. The screen will turn red, green then blue.
3. Once this is complete, you will be prompted to touch different areas of the LCD. A
“OK” message will replace the “Touch” as you touch the identified areas.
4. Once all areas pass, you will see a “Test O K” message will appear.
5. Press “Finish” to complete close the LCM Test.
Item Description