10 Paper and other Media
158 Xerox Phaser 3635 User Guide
Loading Paper
Preparing Paper for Loading
Before loading paper into the paper trays, fan the edges. This procedure separates
any sheets of paper that are stuck together and reduces the possibility of paper
jams.
NOTE: To avoid unnecessary paper jams and misfeeds do not remove paper from
its packaging until required.
Loading the Paper Trays
Using the instructions provided below, load paper into the machine. Up to three
paper trays are available, depending on your machine configuration.
1. To load paper, carefully pull out the paper tray.
NOTE: Take care not to let the tray fall when removing it from the device.
2. Adjust the rear paper guide to the required paper
length. It is preset to A4 or Letter size depending on
country. To load another size, squeeze the rear
guide and move from the current position and into
the required position. The guides should be neither
too loose, nor too tight.
To Next Page
Loading...
Need help?
General
