Xerox PHASER 3635 User Manual

3Copy
Xerox Phaser 3635 User Guide 55
Off: The feature is switched off.
On: Use this option to enable the Booklet Creation feature. There are two further
options available, when Booklet Creation is enabled.
Covers
Use this feature to automatically add covers to your copied set using stock taken
from a different tray than the copies. Covers must be the same size and orientation
as the main body of the job.
Off: The feature is switched off.
Front and Back: Use this option to add both a front and back cover to the copies.
Front Only: Use this option to add a front cover to the copies.
Back Only: Use this option to add a back cover to the copies.
NOTE: Some media types cannot be used as covers.
Transparency Separators
Use this feature to add either a blank or printed divider between each
transparency within a set. Always load transparencies in the Bypass Tray.
Option Description
1 Sided Originals Select this option if the originals are single-sided.
2 Sided Originals Select this option if the originals are double-sided.

Xerox PHASER 3635 Specifications

General

Print Technology	Laser
Print Speed	35 ppm
Print Resolution	Up to 1200 x 1200 dpi
Standard Paper Capacity	550 sheets
ADF Capacity	50 sheets
Duplex Printing	Yes
Scanner Type	Flatbed with ADF
Functions	Print, Copy, Scan, Fax
Processor	360 MHz
Connectivity	Ethernet
Maximum Paper Size	8.5 x 14 inches
Scanner Resolution	Up to 600 x 600 dpi
Network Connectivity	Ethernet
Display	7-inch color touchscreen
Weight	49 lbs