3Copy
Xerox Phaser 3635 User Guide 47
2-Sided Copying
Double-sided copies can be made automatically from one or two-sided originals.
1 1 Sided: Use this option for 1 sided originals when 1 sided copies are required.
12 Sided: Use this option for 1 sided originals when 2 sided copies are required.
1 2 Sided, Rotate Side 2: This option produces 2-sided copies from 1 sided
originals and rotates 180 degrees every second side image. Use this option to
create documents which can be read in a “head to toe” manner, for example a
calendar.
2 2 Sided: Use this option for 2 sided originals when 2 sided copies are required.
2 1 Sided: Use this option for 2 sided originals when 1 sided copies are required.
2 1 Sided, Rotate Side 2: This option produces 1 sided copies from 2 sided
originals and rotates 180 degrees every second side image. The “read” orientation
for this option varies depending on the input originals. For example, if “head to
head” orientation originals are scanned, the output will be “head to toe”. If “head
to toe” orientation originals are scanned, the output produced will be “head to
head”.
2 2 Sided, Rotate Side 2: This option produces 2 sided copies from 2 sided
originals and rotates 180 degrees every second side image.
Copy Output
Output is used to select the finishing requirements for the job. The options will
depend on the finishing output device installed.
Collated: Select Collated for output stacked in sets to match the sequence of the
originals, i.e. (1,2,3 / 1,2,3).
Uncollated: Select Uncollated for output sorted into stacks of individual pages, i.e.
(1,1,1 / 2,2,2 / 3,3,3).
To Next Page
Loading...
Need help?
General
