12 Maintenance
Xerox Phaser 3635 User Guide 201
the front door. The instructions on the screen will tell you how to fit a new
cartridge.
If you do not want to replace the Print Cartridge now you can select the Abort
button. The machine will continue to operate but will NOT make copies or prints.
1. Open the cover on the right side of the machine. This will reveal the latch
used to open the front cover. Open the front cover.
2. Remove the Print Cartridge.
The instructions that are packed
with the new Print Cartridge will tell
you how to dispose of the used Print
Cartridge.
WARNING: Only install the correct
Xerox Print Cartridge in the machine.
3. Before unpacking the new Print
Cartridge, shake well to distribute
the toner. Remove from packaging.
4. To fit the new Print Cartridge, make
sure the toner is facing the correct way up.
5. Insert the Print Cartridge.
6. Close the front cover.
7. Press the Confirm button on the machine display.
If after fitting a new
Print Cartridge the front
door will not close, check
that the Print Cartridge is
positioned and latched
correctly.
If you have replaced the Print Cartridge as a result of a “Replace the Print
Cartridge” message on the machine display, the machine will assume that you
have fitted a new cartridge and reset the toner usage counters and messages. If,
however, you have fitted a new Print Cartridge without being instructed to do so
by the machine display, the toner usage counters will need to be reset manually.
Staple Cartridge
This procedure shows you how to remove a used Staple Cartridge and replace it
with a new Staple Cartridge.
To Next Page
Loading...
Need help?
General
