Xerox PHASER 3635 User Manual

5 Network Scanning
Xerox Phaser 3635 User Guide 91
If necessary, select one of the tabs and configure the network scan settings. For
information on the individual tabs, refer to the following:
Network Scanning on page 94.
Advanced Settings on page 98.
Layout Adjustment on page 100.
Filing Options on page 102.
4 Start the Network Scanning Job
Press the Start button. The machine scans the originals and transfers them to the
scan repository identified by the selected template.
5 Job Status Screen
To follow the progress of your scanning job, press the Job Status button on the
control panel to display the Job Status screen.
The default Job Status screen displays all incomplete jobs, including the queued
network scan job. If there are no incomplete jobs in progress, the message “No
Active Jobs” is displayed. For more information on the Job Status screen, refer to
Job Status Screen in the Copy chapter on page 41.
Advanced Settings
Use the features on this tab to update recently created
templates or temporarily change the scan settings affecting
appearance and style, e.g. image quality, resolution, file
size, etc.
Layout Adjustment
Use the features on this tab to temporarily change the
information relating to your original, e.g. size of scanned
original, scan to edge.
Filing Options
Use the features on this tab to manage the file
destinations, formats and metadata.
Feature Description

Xerox PHASER 3635 Specifications

General

Print Technology	Laser
Print Speed	35 ppm
Print Resolution	Up to 1200 x 1200 dpi
Standard Paper Capacity	550 sheets
ADF Capacity	50 sheets
Duplex Printing	Yes
Scanner Type	Flatbed with ADF
Functions	Print, Copy, Scan, Fax
Processor	360 MHz
Connectivity	Ethernet
Maximum Paper Size	8.5 x 14 inches
Scanner Resolution	Up to 600 x 600 dpi
Network Connectivity	Ethernet
Display	7-inch color touchscreen
Weight	49 lbs