The machine does not send.
Make sure that the original is loaded in the ADF or on the scanner glass.
Sending should show up on the display.
Check the fax machine you are sending to, to see if it can receive your fax.
Condition Suggested solutions
The incoming fax has blank spaces
or is of poor-quality.
The fax machine sending you the fax may be faulty.
A noisy phone line can cause line errors.
Check your machine by making a copy.
The toner cartridge may be empty.
Some of the words on an incoming
fax are stretched.
The fax machine sending you the fax had a temporary document jam.
There are lines on the originals you
send.
Check your scan unit for marks and clean it.
The machine dials a number, but a
connection with the other fax
machine fails.
The other fax machine may be turned off, out of paper, or cannot answer
incoming calls.
Speak with the other machine operator and ask her/him to sort out the
problem.
Faxes do not store in memory. There may not be enough memory space to store the fax. If the display
shows the Memory Full message, delete from memory any faxes you no
longer need and then try again to store the fax.
Blank areas appear at the bottom
of each page or on other pages,
with a small strip of text at the top.
You may have chosen the wrong paper settings in the user option setting.
For details about paper settings.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
