To Next Page
R
Rachel CollierAug 27, 2025
What causes Xerox PrimeLink B9100 Printer copies to be too light?
- BBarbara WoodsAug 28, 2025
If your Xerox Printer copies are consistently too light, it's likely that the copy density setting is set to Light.
What causes Xerox PrimeLink B9100 Printer copies to be too light?
If your Xerox Printer copies are consistently too light, it's likely that the copy density setting is set to Light.
Why aren't documents feeding into the document feeder of my Xerox PrimeLink B9100?
If documents aren't feeding into the document feeder of your Xerox Printer, it could be because the documents are too small. The minimum size of the document that can be loaded on the document feeder is A5, which is 148 x 210 mm (5.8 x 8.3 in.).
Why do I get an error message on my Xerox PrimeLink B9100 after loading paper in Tray 5 (Bypass)?
If you're getting an error message after loading paper in Tray 5 (Bypass) and pressing the Start button on your Xerox Printer, the paper guides at the front of the tray might be incorrectly positioned. Make sure to set the paper guides to the correct positions.
Why does the printed toner smudge when rubbed on my Xerox prints?
If the printed toner smudges when rubbed on your Xerox prints, it could be due to a couple of reasons. The paper might be damp, so try replacing it with paper from a new ream. Alternatively, the paper you're using might be unsuitable; try loading suitable paper.
Why does a stripe pattern appear in copies from my Xerox PrimeLink B9100 Printer?
If a stripe pattern appears in copies from your Xerox Printer, the document enlargement ratio is likely set too large. Some enlargement ratios can cause stripes, so try adjusting the copy enlargement ratio.
How to fix an error message after loading paper in paper Tray 5 (Bypass) on Xerox PrimeLink B9100?
If you receive an error message after loading paper in paper Tray 5 (Bypass) and pressing the Start button, make sure that the paper guides at the front side of paper Tray 5 (Bypass) are set to the correct positions.
How to turn on Xerox PrimeLink B9100?
If your Xerox Printer is not powering on, there might be a few reasons. First, check if the power switch is in the off position and switch it on. Second, ensure the power cord is properly plugged into both the electrical outlet and the printer. If the power cord is disconnected, firmly plug it in and then turn the power switch on. Lastly, make sure the power supply provides the correct voltage (200-240 V, 15 A) and is compatible with the printer's maximum power consumption (2.8-3.1 KVA).
Why are black lines printed on my Xerox Printer copies?
If black lines are appearing on your Xerox Printer copies, the drum cartridge may be depleted or damaged, so contact Xerox Technical Customer Support. Alternatively, the document glass on the document feeder might be dirty; clean the document glass.
Why does dirt appear at equal intervals on my Xerox PrimeLink B9100?
If dirt appears at equal intervals on your Xerox Printer, there may be dirt on the paper feed path. Try printing a few pages to see if the issue resolves itself.
Why is nothing being printed on my Xerox PrimeLink B9100 Printer?
If nothing is being printed on your Xerox Printer, it could be due to a couple of reasons. Two or more sheets of paper might be feeding simultaneously (double feed); fan the paper and then reset it. Alternatively, there might be a high-voltage power supply malfunction; in this case, contact Xerox Technical Customer Support.
General| Recommended Monthly Print Volume | 70, 000 - 700, 000 pages |
|---|---|
| Duplex Printing | Standard |
| Type | Multifunction Printer |
| Print Technology | Laser |
| Supported Operating Systems | Windows, Mac OS, Linux |
| Print Resolution | 2400 x 2400 dpi |
| First-page-out time, printing | 4.1 seconds |
| Network Connectivity | Ethernet |
| Supported Media Sizes | A3, A4, A5, B4, B5 |
| Weight | 210 kg |
| Print Speed (Black) | 100 ppm |
Guidelines for safe use of electrical components and power supply.
Safe operating procedures, including handling moving parts and avoiding hazards.
Information regarding laser safety compliance and warnings.
Safety precautions related to the printer's internal lithium battery.
Safety precautions to follow during printer maintenance procedures.
Procedures for printing documents over a network using PostScript and PCL drivers.
Step-by-step guide for making copies using the automatic document feeder.
Instructions for making copies using the document glass.
Details on various copy features like Reduce/Enlarge, Paper Supply, and 2-Sided Copying.
Options for adjusting image quality, including Original Type and Image Options.
Features for adjusting copy layout, such as Book Copying, Original Size, and Edge Erase.
Options for controlling the output format, including Booklet Creation, Covers, and Page Layout.
Functionality for building complex copy jobs with multiple segments and settings.
Overview of the fundamental procedure for scanning documents.
Details on available scan settings, including main scan and advanced settings.
How to create and use job templates for scanning over a network.
Procedures for scanning documents and sending them to a network server via FTP or SMB.
Instructions for scanning documents and saving them to a folder on the device.
Guide for scanning documents and saving them to a USB memory device.
Scanning documents and sending them as email attachments.
Step-by-step instructions for sending faxes using the multifunction printer.
Step-by-step process for saving custom printer settings as a stored program.
How to retrieve and execute a previously stored program.
Procedure for selecting files from a USB device for printing.
Information on viewing, canceling, and managing active, pending, and completed jobs.
Accessing device status information like Device Information, Faults, and Supplies.
Detailed instructions for loading paper into different printer trays.
Procedures for cleaning the printer's exterior, touch screen, document glass, and feeder rollers.
Instructions for checking and replacing consumables like toner cartridges and waste toner containers.
Common troubleshooting steps for printer issues like not powering on or dark display.
Solutions for common image quality problems encountered during copying or scanning.
Solutions for issues related to unable to copy or incorrect copy results.
Guidance for resolving problems encountered during printing, such as unable to print.
Solutions for issues encountered during scanning, like unable to scan or import.
Procedures for clearing paper jams from various locations within the printer and its accessories.
Troubleshooting steps for issues related to sending and receiving faxes.
Instructions for loading paper and special media into the standard and XLS bypass trays.
Step-by-step instructions for loading paper into the High Capacity Feeder trays.
Instructions for loading paper and special media into the OHCF trays.
