EasyManuals Logo

Xerox WorkCentre 5325 Administrator's Guide

Xerox WorkCentre 5325
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #117 background imageLoading...
Page #117 background image
Faxing
WorkCentre 5300 Series Multifunction Printer
System Administrator Guide
117
To set up fax folder options:
1. In CentreWare IS, click Properties > Services > Fax > Fax Received Options.
2. Next to the Folder Selector Setup, click Enabled.
3. Click Apply. After the printer restarts, navigate back to the Fax Received Options page.
4. Under Folder Selector Setup, select a line and click Change Settings.
5. Next to Save Incoming Fax in Designated Folder, select Enabled.
6. Type a three-digit folder number and click Apply. Navigate back to the Faxed Received
Options page.
7. Click File Transfer Settings.
8. Select the destination options you would like faxes for this line to be forwarded to and click Next.
9. Enter appropriate settings for all selected destinations.
10. Click Apply.
Selecting the Folder Where Received Faxes are Stored
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch System Settings > Fax Service Settings > Fax Received Options.
3. Touch Folder Selector Setup.
4. Touch a line, then touch Change Settings.
5. Touch On, and type the three-digit number of the folder that you want to use for storing
received faxes.
6. Touch Save.
Specify the Output Tray
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch System Settings > Fax Service Settings > Fax Received Options.
3. Touch Output Destination Setup.
4. Under Fax Received - Line 1, select an output tray, and touch Save.
5. Repeat for other lines.
6. Under Public Folder Printed Files, select an output tray polling.
Reduce/Enlarge Presets
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch System Settings > Fax Service Settings > Fax Received Options.
3. Touch Reduce/Enlarge Presets.
4. Change the following settings as necessary:
Preset %: Specify the preset magnification values to appear in the Layout Adjustment
Screen. Variable %: Specify the default magnification value to appear in the Layout
Adjustment Screen.

Table of Contents

Other manuals for Xerox WorkCentre 5325

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox WorkCentre 5325 and is the answer not in the manual?

Xerox WorkCentre 5325 Specifications

General IconGeneral
Print TechnologyLaser
FunctionsPrint, Copy, Scan, Fax
Print Speed (Black)Up to 25 ppm
Print ResolutionUp to 1200 x 1200 dpi
Standard Paper Capacity1, 090 sheets
Max Paper Capacity5, 090 sheets
Processor533 MHz
Copy SpeedUp to 25 cpm
Copy ResolutionUp to 600 x 600 dpi
Scan ResolutionUp to 600 x 600 dpi
Duplex PrintingAutomatic
Paper SizesA4, A5
Memory256 MB
Hard Drive80 GB
ConnectivityUSB 2.0, Ethernet
Scan DestinationsEmail, Network, USB
Fax Transmission Speed33.6 Kbps
Operating System CompatibilityWindows, macOS, Linux

Related product manuals