Xerox WorkCentre 5325 Administrator's Guide

Accounting
WorkCentre 5300 Series Multifunction Printer
System Administrator Guide
135
Accounting and Billing Device Settings
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Accounting > Accounting / Billing Device Settings.
3. Change the following settings as necessary:
• Connect with Account / Billing Device: Touch Connected to enable an accounting or billing
device that is connected to the printer.
• Account / Billing Device: Touch the type of device.
• Track Copy Jobs: Touch Track with Accounting/Billing Device to track copy pages.
• Track Print Jobs: Touch Track with Accounting/Billing Device to track print pages.
• Track Scan/ Fax Jobs: Touch Track with Accounting/Billing Device to track scanned or
faxed pages.
• Interrupt Mode: Touch Enabled to enable the interrupt mode.
• Job with Insufficient Credit: Touch to delete, hold, or delete on timeout on a job with
insufficient credit.
• Charge Print Jobs: Touch Charge by Card Number to track charges by card number.
• Track with Cumulative Device: Touch the type of device.
• Scan Ahead for Copy Job: Touch Enabled to scan ahead for a copy job.

Xerox WorkCentre 5325 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Speed (Black)	Up to 25 ppm
Print Resolution	Up to 1200 x 1200 dpi
Standard Paper Capacity	1, 090 sheets
Max Paper Capacity	5, 090 sheets
Processor	533 MHz
Copy Speed	Up to 25 cpm
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Duplex Printing	Automatic
Paper Sizes	A4, A5
Memory	256 MB
Hard Drive	80 GB
Connectivity	USB 2.0, Ethernet
Scan Destinations	Email, Network, USB
Fax Transmission Speed	33.6 Kbps
Operating System Compatibility	Windows, macOS, Linux