Xerox WorkCentre 5325 Administrator's Guide

Administrator Tools
WorkCentre 5300 Series Multifunction Printer
System Administrator Guide
152
Updating the Printer Software
When Xerox releases a new version of printer software or firmware, you can update your printer to
incorporate the new fixes and improvements.
Updating the Software
Before you begin
• Determine the current software version of your printer.
• Download the latest software update file in .bin format from the drivers and downloads page for
your specific printer.
To determine the currently installed software version:
1. In CentreWare IS, click Properties > General Setup > Configuration.
2. Scroll down to Software to verify the software version.
To update the software:
1. In CentreWare IS, click Properties > Services > Machine Software > Upgrades.
2. Under Upgrades select Enabled.
3. Click Apply.
4. Refresh you browser and navigate to Properties > Services > Machine Software > Manual Upgrade.
5. Under Manual Upgrade, click Browse to locate and select the software upgrade file in .bin format.
6. Click Open.
7. Click Install Software.
The file is sent to the printer. Once the software is installed, the printer restarts.
8. Check the configuration report to verify that the software has updated.

Xerox WorkCentre 5325 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Speed (Black)	Up to 25 ppm
Print Resolution	Up to 1200 x 1200 dpi
Standard Paper Capacity	1, 090 sheets
Max Paper Capacity	5, 090 sheets
Processor	533 MHz
Copy Speed	Up to 25 cpm
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Duplex Printing	Automatic
Paper Sizes	A4, A5
Memory	256 MB
Hard Drive	80 GB
Connectivity	USB 2.0, Ethernet
Scan Destinations	Email, Network, USB
Fax Transmission Speed	33.6 Kbps
Operating System Compatibility	Windows, macOS, Linux