Xerox WorkCentre 5325 Administrator's Guide

Security
WorkCentre 5300 Series Multifunction Printer
System Administrator Guide
64
FIPS140-2 Data Encryption
All data stored on and transmitted by the printer is encrypted. Some services and protocols, such as
SMB, NetWare, SNMPv3, and the PDF Direct Print service do not use an encryption method that
complies with government standard FIPS140-2.
You can warn users with a control panel message when data is about to be transmitted that is not
encrypted to FIPS140-2 standard.
For more information, see the printer’s Security White Paper on the Xerox website.
To enable the warning message:
1. In CentreWare IS, click Properties > Security > FIPS140 Validation Mode.
2. Next to FIPS140 Validation Mode, select Enabled.
Note: FIPS 140-2 encryption does not apply to the following services and protocols: SMB,
NetWare, SNMPv3, PDF Direct Print Service.

Xerox WorkCentre 5325 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Speed (Black)	Up to 25 ppm
Print Resolution	Up to 1200 x 1200 dpi
Standard Paper Capacity	1, 090 sheets
Max Paper Capacity	5, 090 sheets
Processor	533 MHz
Copy Speed	Up to 25 cpm
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Duplex Printing	Automatic
Paper Sizes	A4, A5
Memory	256 MB
Hard Drive	80 GB
Connectivity	USB 2.0, Ethernet
Scan Destinations	Email, Network, USB
Fax Transmission Speed	33.6 Kbps
Operating System Compatibility	Windows, macOS, Linux