Xerox WorkCentre 5325 Administrator's Guide

Faxing
WorkCentre 5300 Series Multifunction Printer
System Administrator Guide
125
13. Under Secondary SIP Proxy Registrar Server Setup, type information about your secondary
proxy server.
14. Click Apply.
Registering VoIP Gateways
1. In CentreWare IS, click Properties > Protocols > VoIP Gateway.
2. Click Create to add a new SIP Gateway ID.
3. Type an ID and IP address of the gateway.
Note: You can register up to 50 Gateways.
4. Click Apply.
Configuring T.38 Settings
1. In CentreWare IS, click Properties > Connectivity > Protocols > T.38.
2. Select a T.38 Transport Protocol to prioritize TCP or UDP packets.
3. Edit the default Listening Port Numbers if necessary.
4. Next to Prioritize IP Packets, type a number to set the priority of T.38 packets relative to other IP
network activity. A higher number indicates higher priority.
5. Click Apply.
Configuring other SIP Fax Settings
To set SIP fax line names and other fax settings, see:
• Configuring Fax Settings on page 114
• Setting Fax Defaults on page 116
• Setting Incoming Fax Options on page 116

Xerox WorkCentre 5325 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Speed (Black)	Up to 25 ppm
Print Resolution	Up to 1200 x 1200 dpi
Standard Paper Capacity	1, 090 sheets
Max Paper Capacity	5, 090 sheets
Processor	533 MHz
Copy Speed	Up to 25 cpm
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Duplex Printing	Automatic
Paper Sizes	A4, A5
Memory	256 MB
Hard Drive	80 GB
Connectivity	USB 2.0, Ethernet
Scan Destinations	Email, Network, USB
Fax Transmission Speed	33.6 Kbps
Operating System Compatibility	Windows, macOS, Linux