Faxing
WorkCentre 7120/7125 Multifunction Printer
System Administrator Guide
118
Original Size Defaults
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch System Settings > Fax Service Settings > Fax Received Options.
3. Touch Original Size Defaults.
4. Change the default settings as necessary.
Fax Confirmation Report
You can configure a confirmation sheet to notify users if a fax transmission was not successful.
1. In CentreWare IS, click Properties > Services > Fax > Defaults.
2. Next to Confirmation Sheet, select Errors Only.
3. Click Apply.
To Next Page
Loading...
