Xerox WorkCentre 7125 System Administrator Guide

Customization and Expansion
WorkCentre 7120/7125 Multifunction Printer
System Administrator Guide
160
Auxiliary Interface Kit
An Auxiliary Interface Kit, or a Foreign Device Interface kit, is a third-party access and accounting
device such as a coin operated printer accessory or a card reader that can be attached to the printer.
Installation instructions are included with the Foreign Device Interface Kit. After the kit is installed, you
must enable and configure the device at the control panel.
To configure Accounting/Billing Device settings, see Accounting and Billing Device Settings on
page 135.
To configure accounting, see Accounting on page 127.
To configure authentication, see Local Authentication on page 49.

Xerox WorkCentre 7125 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Standard Paper Capacity	1, 090 sheets
Maximum Paper Size	12 x 18 in. / SRA3
Duplex Printing	Yes
Print Speed	25 ppm
Monthly Duty Cycle	75, 000 pages
Connectivity	10/100/1000Base-T Ethernet, USB 2.0
Operating System Compatibility	Windows, Mac, Linux
Copy Speed	25 cpm