Xerox WorkCentre 7125 System Administrator Guide

Administrator Tools
WorkCentre 7120/7125 Multifunction Printer
System Administrator Guide
152
Updating the Printer Software
When Xerox releases a new version of printer software or firmware, you can update your printer to
incorporate the new fixes and improvements.
Updating the Software
Before you begin
• Determine the current software version of your printer.
• Download the latest software update file in .bin format from the drivers and downloads page for
your specific printer.
To determine the currently installed software version:
1. In CentreWare IS, click Properties > General Setup > Configuration.
2. Scroll down to Software to verify the software version.
To update the software:
1. In CentreWare IS, click Properties > Services > Machine Software > Upgrades.
2. Under Upgrades select Enabled.
3. Click Apply.
4. Refresh you browser and navigate to Properties > Services > Machine Software > Manual Upgrade.
5. Under Manual Upgrade, click Browse to locate and select the software upgrade file in .bin format.
6. Click Open.
7. Click Install Software.
The file is sent to the printer. Once the software is installed, the printer restarts.
8. Check the configuration report to verify that the software has updated.

Xerox WorkCentre 7125 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Standard Paper Capacity	1, 090 sheets
Maximum Paper Size	12 x 18 in. / SRA3
Duplex Printing	Yes
Print Speed	25 ppm
Monthly Duty Cycle	75, 000 pages
Connectivity	10/100/1000Base-T Ethernet, USB 2.0
Operating System Compatibility	Windows, Mac, Linux
Copy Speed	25 cpm