Network Configuration
WorkCentre 7120/7125 Multifunction Printer
System Administrator Guide
29
LPD
The Line Printer Daemon (LPD) protocol is used to provide printer spooling and network print server
functionality for operating systems such as HP-UX, Linux, and MAC OS X.
Note: For information on setting up print queues on your client system, refer to your client
system’s documentation.
Enabling LPD
1. In CentreWare IS, click Properties > Connectivity > Port Settings.
2. Next to LPD, select the Enabled check box.
Note: Disabling LPD will affect clients printing to the printer over TCP/IP using the LPR
printing port.
Configuring LPD
1. In CentreWare IS, click Properties > Connectivity > Protocols > LPD.
2. Type an LPD Port Number or use the default port number of 515.
3. Enter the Connection Time-Out.
4. Enter the Maximum Number of Sessions.
5. Next to TCP-MSS Mode, select Enabled if necessary.
Note: TCP-MSS settings are common for LPD and Port 9100.
6. If TCP-MSS mode is enabled, under IPv4, type the IP addresses for Subnet 1, 2, and 3.
7. Click Apply.
To Next Page
Loading...
