Xerox WorkCentre 7125

Network Configuration
WorkCentre 7120/7125 Multifunction Printer
System Administrator Guide
39
NetWare
NetWare is a network operating system developed by Novell to run various services using
cooperative multitasking.
Before you begin:
1. Ensure an existing operational NetWare network is available
2. Verify that you have administrator rights to log in to a NetWare file server/tree.
3. Ensure the printer is connected to the network.
4. Set up a print server object using the appropriate Novell utility. Refer to the Novell system
documentation for help.
Enabling NetWare
1. In CentreWare IS, click Properties > Connectivity > Port Settings.
2. Next to NetWare, select Enabled.
3. Select IPX/SPX or TCP/IP if you want to enable these protocols.
4. Click Apply.
Configuring NetWare Settings
1. In CentreWare IS, click Properties > Connectivity > Protocols > NetWare.
2. Select the Frame Type from the drop-down menu. Options are:
• Auto
• Ethernet II
• Ethernet 802.2
• Ethernet 802.3
• Ethernet SNAP
3. Type a polling rate between 1 and 240 seconds for the print server in Queue Poll Interval. The
default value is 5 seconds.
4. Type the Printer Server Name.
5. Type the server password in the New Print Server Password field. Retype to confirm.
6. Select the Active Mode type from the drop-down menu. Options are:
• Directory: PServer Mode
• Bindery: PServer Mode
7. Type the Number of Searches, from 1-100. Type 0 for no limit.