Network Configuration
WorkCentre 7120/7125 Multifunction Printer
System Administrator Guide
42
IPP
Internet Printing Protocol (IPP) is used for remote printing and managing print jobs.
Enabling IPP
1. In CentreWare IS, click Properties > Connectivity > Port Settings.
2. Next to IPP, select Enabled.
3. Click Apply.
Configuring IPP
1. In CentreWare IS, click Properties > Connectivity > Protocols > IPP.
2. Next to Add Port Number, type the port number that you want the printer to use.
3. Next to Administrator Mode select Enabled to allow only one specific user to control or delete
any print job.
4. Type the Connection Time-Out. Default is 60 seconds.
5. Click Apply.
To Next Page
Loading...
Need help?
General
