Xerox WorkCentre 7125 System Administrator Guide

Network Configuration
WorkCentre 7120/7125 Multifunction Printer
System Administrator Guide
28
5. Under Traps, select the type of Traps to be Received by the SNMP manager.
6. Click Apply.
Adding IPX Trap Destination Addresses
Internetwork Packet eXchange (IPX) is a routing protocol used by Novell NetWare environments.
1. In CentreWare IS, click Properties > Connectivity > Protocols > SNMP.
2. Click Advanced at the bottom of the page.
3. Under Trap Destination Addresses, click Add IPX Address.
4. Type the 8-digit hexadecimal number that identifies the IPX External Network host configured to
receive the trap.
5. Type the 48-bit Physical MAC Address of the computer running the SMNP manager application
that is to receive the trap.
6. Type the IPX Socket Number of the computer running the SNMP manager application configured
to receive the packets.
7. Select the SNMP version, SNMP v1 or SNMP v2c based on the trap receiving system.
8. Under Traps, select the type of Traps to be Received by the SNMP manager.

Xerox WorkCentre 7125 Specifications

General

Brand	Xerox
Model	WorkCentre 7125
Category	All in One Printer
Language	English