Wireless Array
88 The Web Management Interface
Note that WMI provides an option that allows you to change its behavior. You
may change:
Refresh Interval — the refresh interval, if automatic refresh is selected.
See “Options” on page 406 for more information.
Logging In
Use this procedure to log in to the WMI via your Web browser.
1. Establish a network connection and open your Web browser.
2. If your network supports DHCP and DNS, enter the Array’s default host
name in the browser’s URL. The default host name is simply the Array’s
serial number (for example, XR0823091CACD).
Otherwise, enter the Array’s IP address. This may be determined as
described in “Using the Ethernet Ports” on page 73.
3. The default login to the Array’s Web Management Interface is admin for
both the user name and password.
Figure 42. Logging In to the Wireless Array
Some pages or individual settings are only available if the Array’s license
includes appropriate Xirrus Advanced Feature Sets. If a setting is
unavailable (grayed out), then your license does not support the feature. See
“About Licensing and Upgrades” on page 387.
To Next Page
Loading...
Need help?
General
